Skip to content
Madden NFL

How to Lob Pass in Madden 27 and When to Use Touch or Bullet Passes

Quarterback lofting a deep ball over a cornerback down the sideline, showing how to lob pass in Madden 27

Key facts

  • To throw a lob pass in Madden 27, quickly tap the receiver’s button.
  • A touch pass is a brief hold and release, and a bullet pass is a full hold until the QB lets go.
  • Bullet, lob and touch passes work in all four passing styles.
  • Hold L1 or LB while throwing to get a high pass over underneath defenders.
  • The September 16, 2026 title update extended the default pass lead on throws to receivers running downfield.

To throw a lob pass in Madden 27, quickly tap the receiver’s button instead of holding it. A brief hold and release gives you a touch pass, and holding until the quarterback lets go gives you a bullet. It sounds simple. The hard part is the timing, and knowing when a lob wins you a touchdown and when it hands the other guy a pick-six.

How to lob pass in Madden 27, the short answer

You throw a lob pass in Madden 27 by quickly tapping your target receiver’s icon button. EA’s official help page says it plainly: a lob pass puts more air under the ball so it can travel over defenders, and you throw one by tapping the receiver’s button quickly. Here’s the full sequence:

  1. Call a play with a vertical, corner, wheel or fade route.
  2. Read the coverage before the snap and find the receiver most likely to get a step on his man.
  3. Snap the ball and let the route clear the underneath defenders.
  4. Push the left stick toward open grass to lead the receiver.
  5. Quickly tap that receiver’s button to throw the lob.
  6. If you use Timing-Based Catching, tap the receiver’s button again as the ball comes down.

Lob, touch and bullet all come from the same button. Pressure is what changes the throw. One player described it well: a bullet pass is a full hold, a touch pass is a partial hold, and a lob is just a quick tap.

Pass type Button input Ball flight Best for
Lob Quick tap of the receiver button High arc, most hang time Fades, go routes, wheel routes against trailing coverage
Touch Brief hold, then release Medium arc Corners, seams, dropping the ball between levels
Bullet Hold until the QB releases Flat and fast Slants, digs, tight windows
High pass Hold L1 or LB while throwing Raised catch point Throwing over an underneath defender

Pro tip: Think of the button as a dimmer switch, not an on-off switch. The longer you hold it, the flatter and faster the ball comes out.

What you need before you throw a Madden lob pass

You need very little: a copy of Madden NFL 27, a controller or mouse and keyboard, and any of the four passing styles. Madden NFL 27 launched worldwide on August 13, 2026, and the lob has been in the game since day one. You don’t unlock it and you don’t need a specific mode.

Passing style does not block lob passes

Pass types (bullet, lob, and touch) are available in all passing styles. The style changes how much control you have over placement and accuracy. EA’s help page points to Classic, Revamped, Placement, and Placement & Accuracy as the four options. If your throws feel off, check your style first. If your passes don’t feel the way you expect, you might be using a different passing style.

Passing style How the lob feels Who it suits
Classic The game handles most of the lead, so the tap mostly controls arc Newer players and old-school Madden fans
Revamped Mixes your input with QB ratings, so the meter fill sets the arc Players who want touch without full manual aim
Placement Stick aim matters more, and power gets more weight Players who want to steer every throw
Placement and Accuracy Timing and stick aim decide accuracy Competitive players willing to grind the learning curve

Game version matters a little

Keep your game updated. The September 16, 2026 title update included tuning to extend the default pass lead distance when throwing to a receiver running downfield. That’s exactly the throw a lob is built for. If your timing was set before that patch, your deep balls may now land further ahead than you’re used to, so give yourself a few reps to adjust.

Step-by-step instructions for a Madden lob pass that actually lands

A good lob takes three decisions in a row, and the tap is the last of them. Most interceptions come from getting the first two wrong.

how to lob pass in madden 27: Step-by-step instructions for a Madden lob pass that actually lands

Step 1: Pick the right route and the right matchup

Lobs work best on routes that keep running toward the end zone or sideline: go routes, fades, wheels, and deep corners. Look for one-on-one coverage with no deep safety on that side. If a safety is sitting over the top, the extra hang time just gives him longer to get there.

Step 2: Let the route clear the underneath defenders

A lob thrown too early comes down right on a curl-flat defender’s head. Wait until your receiver is past the linebackers and stacked on, or level with, his corner. On a go route that usually means after his first 12 to 15 yards.

Step 3: Lead to grass with the left stick

Push the left stick away from the defender while you throw. Toward the sideline on a fade, and upfield on a go. On Revamped there are small, medium, and large lead options, while with classic passing, pass leading is almost 100% controlled by the game.

Step 4: Tap, don’t press

Tap the receiver button and let go right away. That’s the whole lob input. On Revamped, one forum breakdown compares the meter to a 1 to 100 scale, with 1 being an absolute lob pass (tapping the throw button) and 100 being a full bullet. Filling the meter about 25 to 35 percent gets you a touch and lob hybrid.

Step 5: Finish the catch

Timing-Based Catching is an optional skill-based mechanic that gives players more control over contested catches. If it’s on, tap the receiver’s icon as the ball arrives.

Heads up: Lobs and touch passes may not show up on the Controls screen in the settings menu, because they’re timing inputs rather than separate buttons. They’re in the game. You just won’t find them listed there.

Lob, touch and bullet controls by platform

The controls are the same on PlayStation and Xbox apart from the button labels. The lob input is always a quick tap of whichever receiver icon you’re targeting.

Action PlayStation Xbox PC (controller)
Lob pass Quick tap of receiver icon (X, Circle, Square, Triangle, R1) Quick tap of receiver icon (A, B, X, Y, RB) Same as your controller layout
Touch pass Brief hold, then release Brief hold, then release Same as your controller layout
Bullet pass Hold until the QB releases Hold until the QB releases Same as your controller layout
High pass Hold L1 and throw Hold LB and throw Same as your controller layout
Low pass Hold L2 and throw Hold LT and throw Same as your controller layout
Pump fake Double tap receiver icon Double tap receiver icon Same as your controller layout
Throw away Press R3 Press RS Same as your controller layout
Pass lead Left stick Left stick Left stick

Some players report one platform quirk. They describe the press as very sensitive on PS, so PlayStation users may find that a light tap sometimes still comes out as a touch or bullet.

To change your passing style, open the pause menu, go to Settings, then Game Options, and set Passing Type. Passing Type

When to use a lob pass and when to go with touch or bullet

Use a lob when your receiver has beaten his defender vertically and nobody is coming over the top. Use a bullet when a defender is close enough to undercut the throw. Touch covers everything in between. That’s the decision rule, but the reasons behind it matter.

how to lob pass in madden 27: When to use a lob pass and when to go with touch or bullet

Where lobs earn their keep

Lobs give your receiver time to run under the ball. Lob Passes are always useful on a fade or a route where you want to lead your receiver to beat the defensive back trailing them. Wheel routes from the backfield against a linebacker, back-shoulder fades on the goal line, and go routes against Cover 0 are all prime lob territory.

Where touch is the better call

A touch pass sits between a bullet and a lob, adding just enough arc to drop the ball into space. Corner routes against Cover 2 are the textbook case: you need enough arc to clear the flat defender but not so much that the safety rotates over. Seams between the linebackers and safeties belong in this bucket too.

Where you should not lob

Anything over the middle, anything short, and any route with a robber or underneath defender in the lane. A lob also takes longer to arrive, and the new WR and DB system brings realistic hand-fighting, jostling, and leverage that define separation and coverage. A trailing corner who wins the jostle will catch up to a floater.

A worked example: Josh Allen against Cover 1

Say you’re the Bills, it’s 2nd and 6 at midfield, and the defense shows a single high safety rotated to the strong side. You call Four Verticals. Your boundary receiver gets a clean release outside, and the safety is shading the other hash.

That’s your lob. Wait until the receiver passes the corner’s hip, push the left stick toward the sideline, and tap. Allen’s arm gives you room to be a hair late. Now flip it: the safety drops to your side at the snap. The lob is dead, so take the seam with a touch pass or hit the checkdown with a bullet. It’s Kelly to Reed on the big plays and Kelly to the backs on the rest. Good quarterbacks have been doing that since before most of us had a controller.

Pro tip: If a linebacker or nickel defender is sitting underneath your target, hold L1 or LB for a high pass instead of floating a lob. You get the height without the hang time.

When your lob pass does not work and how to fix it

Usually a lob fails for one of four reasons: wrong press, wrong passing style, wrong lead, or wrong coverage read. Here’s how to sort it out.

Common mistakes players make

  1. Holding too long. Players regularly say things like a few times I try to throw a touch pass and it’s a bullet. The fix is a lighter, faster tap. Release the button almost as soon as you press it.
  2. Lobbing over underneath defenders. It feels right but loses the race. One guide notes that if you lob it, the ball takes too long to get there. Use a high pass instead.
  3. Throwing behind the receiver. No left stick input means the game picks the lead. After the September 16 tuning, the default lead is longer on downfield throws, so over-steering can now sail the ball out of bounds.
  4. Lobbing into two-high safeties. Against Cover 2 and Cover 4, the deep safeties are paid to break on hang time.
  5. Forgetting the catch. If Timing-Based Catching is on and you don’t tap as the ball arrives, a perfect lob can still turn into an incompletion.

Fix checklist

  • Confirm your passing style in Settings before blaming the controller.
  • Run 10 to 15 reps of each pass type in practice mode or the skills trainer.
  • If lobs still feel random, switching back to classic passing controls is an option while you get used to the new mechanics.
  • Check that your controller’s face buttons aren’t sticking. A worn button can turn a tap into a hold.

Heads up: On Placement and Accuracy, some experienced players argue you should almost never be throwing lob or touch passes. I think that goes too far for everyday play. It’s fair advice in ranked games against good users, though.

Related passing tricks worth knowing alongside the Madden touch pass

The lob is one tool in a bigger passing kit, and it works best when the defense also has to respect everything else. These are the moves that pair best with it.

High pass and low pass

The high pass (L1 or LB) raises the catch point, and the low pass (L2 or LT) keeps the ball away from a defender over the top. One forum player confirms you can still hold L1 and your receivers passing icon for a high point pass, and you can still hold L2 for a low pass. Combine a high pass with a touch press and you get a ball that clears linebackers and still arrives on time.

Pump fake into the lob

Double tap the receiver icon to pump fake. Against a cornerback who bites on a stop or comeback, one pump followed by a lob tap is the oldest double move in football. It’s still effective.

Throw it away

Press R3 or RS to throw it away when the lob isn’t there. Taking an incompletion beats forcing a floater into a rotating safety. We’ve all watched that ball hang in the air while we pray, and it rarely ends well.

Build a full passing game

Pass types only matter if your play calling creates the matchups. For playbooks, Franchise strategy and Ultimate Team lineups that set up your deep shots, check out our Madden NFL 27 Guides. Learn the tap, learn the read, and the deep ball goes from a coin flip to a weapon.

FAQ

What button is lob pass in Madden 27?

There is no separate lob button. You quickly tap the receiver’s icon button, for example X on PlayStation or A on Xbox for that receiver, and the quarterback puts air under the ball.

How do you throw a touch pass in Madden 27?

Press the receiver’s button briefly, then release it. The hold is longer than a lob tap but shorter than a bullet, which gives the ball a medium arc.

Why does my lob keep turning into a bullet pass?

You’re most likely holding the button too long. Lobs need a very quick tap, and the window is tight, so practice the timing in practice mode or the skills trainer.

Is a high pass the same as a lob in Madden 27?

No. A high pass comes from holding L1 or LB while you throw, and it lifts the catch point over an underneath defender. A lob is an arc for distance and hang time.

Do lob passes work with Placement and Accuracy passing?

Yes, all three pass types work in every passing style. Many competitive players on Placement and Accuracy still throw bullets with a high pass most of the time, because lobs give defenders time to close.

Where are lob and touch passes listed in the Madden 27 controls menu?

Usually they aren’t listed. Pass types depend on how long you press the receiver button, so the in-game controls screen won’t show them as separate inputs.

Sources

2 comments

Leave a Reply

Your email address will not be published. Required fields are marked *